Model GX-7-DI Spray Gun
12
22943-1, Issue 1
Shutdown
TOOLS REQUIRED
•
5/16” Spintite
IMPORTANT: Follow this procedure whenever the gun is out of service for any
length of time. For mid/end of day service, see the Cleaning Procedure section of
this manual.
1.
ENGAGE THE SAFETY STOP- Push in and turn the Safety Stop clockwise to place
the gun in the Closed safety position.
2.
CLOSE BOTH MANUAL VALVES- Using the 5/16” Spintite, turn each valve fully
clockwise.
3.
CLEAN AS REQUIRED- See the Cleaning Procedure section of the manual.
NOTE:
Disassembling the gun daily
for cleaning is not
recommended if it has been
operating properly. However,
if the gun is removed from the
hose, it should be flushed and
cleaned thoroughly.
IMPORTANT: As an additional safety precaution, the GX-7-DI air line has a quick
disconnect air coupling. Disconnect the air line when transporting the gun with the
chemical hoses connected.
