Configuration
30
· G&D DL-MUX2-MC2
How to activate or reset the PS/2 mouse:
Resetting the default settings
This function resets the default settings of the KVM switch. By performing this func-
tion, the default settings of the KVM switch mentioned on page 15 are reactivated.
How to reset the default settings:
Setup
mode
1. Press
Backspace
(default:
Ctrl
+
Backspace
) to activate the setup mode.
If the hotkey delay is activated, press the key combination during the adjusted time
(default: 7 seconds).
2. Press one of the setup keys listed below to activate a particular PS/2 mouse:
M
PS/2 mouse of a Linux computer
I
PS/2 wheel mouse of a Linux computer
E
PS/2 wheel mouse with additional keys of a Linux computer
R
PS/2 mouse interface of a Windows computer
Config
Panel
1. Click the tool symbol in the tool bar.
2. Click the tabs
Tools > Default settings
.
Use the information in the fields »Device« and »Comment« to check if you selected the cor-
rect device!
3. Click on
Default settings
to reset the default settings.
NOTE:
The default settings can also be reset by pressing the
Reset
button. Further
information regarding this topic can be found on page 13.