Configuration
G&D DL-MUX2-MC2 ·
27
English
Having activated the
switching delay
function, the switch disconnects the signals of the
user workplace; the signals are then switched onto the selected channel after 100 ms.
How to (de)activate the Switching Delay:
Adjusting the transfer speed of USB K/M signals
In the default settings of the KVM switch, the signals of USB mouse and USB key-
board are transmitted to the active computer in
full speed mode
using a USB connec-
tion.
Enable the
low speed mode
of a channel if it is not possible to operate the computer via
keyboard and/or mouse.
NOTE:
During activated
switching delay
the meantime without a video being dis-
played is perceptibly longer.
Conf
ig
Pan
el
1. Use the tree view to click on
KVM switches > [All switches]
.
2. Right-click the KVM switch and click on the
Configuration
entry in the
context menu.
3. Go to
Switch Delay
under
Configuration
and select one of the following opti-
ons:
No
Having activated the switching command, the signals of the selected
channel are send
instantly
to the user workplace (
recommended setting
).
Yes
Having activated the the switching command, the KVM switch dis-
connects the signals of the user workplace; the signals are then switched
onto the selected channel after 100 ms.
4. Click
OK
to save your changes.