Configuration
26
· G&D DL-MUX2-MC2
How to (de)activate the different switching possibilities:
Reinitialising USB input devices
After connecting a USB keyboard or mouse to the KVM switch, the input devices
are initialised and can be used immediately.
Some USB input devices require a reinitialisation of the USB connection. Enable
the automatic reinitialisation of USB devices if a USB keyboard or mouse does not
respond to your inputs during operation.
How to enable/disable the reinitialisation of USB devices:
Switching Delay
In its standard set-up the KVM Switch switches instantly to the selected channel (by
using an external button or by pressing a Select-Key).
The computer signals of the selected channel are instantly transmitted to the user
workplace.
The connected monitor may not support instant switching, thus not displaying any
video signal. If that should be the case, do activate the
switching delay
function.
Conf
ig
Pan
el
1. Use the tree view to click on
KVM switches > [All switches]
.
2. Right-click the KVM switch and click on the
Configuration
entry in the con-
text menu.
3. Click the
General
tab.
4. Use the field
Disable Switching
to select the options to be disabled (
Buttons,
Hotkeys, Serial, IP
).
5. Click
OK
to save your changes.
Confi
g
Pan
el
1. Use the tree view to click on
KVM switches > [All switches]
.
2. Right-click the KVM switch and click on the
Configuration
entry in the
context menu.
3. Go to
USB Auto Refresh
under
Configuration
and select one of the following
options:
Off
The connected USB input devices do not need to be
reinitialised (
recommended setting
).
All devices
All USB devices are regularly reinitialised.
Only faulty devices
The status of USB devices is monitored. If the
communication with a USB devices is interrupted, the device is
reinitialised.
4. Click
OK
to save your changes.
