Configuration
G&D DL-MUX2-MC2 ·
17
English
Basic operation of the web application
The
Config Panel
web application provides a graphical user interface to configure and
monitor the KVM switch.
The web application can be applied on a computer with installed
Java Runtime Envi-
ronment
. Use one of the supported web browsers to run the application.
Starting the web application
How to start the
Config Panel
web application:
1. Enter the following URL in the address bar to call the web application:
https://[IP address of the KVM switch]
Security instructions for the web browser
The KVM switch stores an SSL certificate which enables the user or the web
browser to authenticate the opposite site.
User authentication against the web application
After the certificates have been authenticated, the login box appears.
How to log in to the
Config Panel
web application:
1. Enter the following data in the login box:
NOTE:
Information regarding the system requirements, the required configuration
of the network interfaces of the KVM switches and the application of the web
application are provided in the separate manual.
NOTE:
You can also start the web application via http connection (port 80). In this
case it is not possible to authenticate the opposite side via certificate.
IMPORTANT:
Replace the certificate that is included in the defaults of the device
with an individual certificate, which is related to the device. Information on how
to create such a certificate is given in the separate manual of the web application.
Username:
Enter your username.
Password:
Enter your user account password.
Select language:
Select the language for the user interface:
(Default):
apply default setting
English
German
