background image

Gunson Eezibleed   8

Safety Precautions:

•  Read the instructions carefully.
•  Be aware that brake fluid contains chemicals which are corrosive and can be an irritant.
•  Keep brake fluid out of the reach of children.
•  Brake fluid can be harmful if swallowed. If this happens consult a doctor (or hospital out-patients 

department). Show them the original container in which the brake fluid is sold.

•  Always store brake fluid in its original container and make sure the cap is very tight. Store it in a 

clean, dry area away from dampness.

•  Never use brake fluid with a DOT rating lower than recommended in the owner’s manual. Brake 

fluid with a low DOT rating could boil and cause soft brake operation.

•  Avoid skin and eye contact with the fluid. If this happens flush with water.
•  If fluid splashes on vehicle paintwork rinse off at once with plenty of water.
•  Eye protection — wear a pair of protective goggles.
•  Keep a bucket of water near where you are working.
•  Collect used brake fluid in a separate, marked, closed container and identify a waste 

management company that will recycle it (subject to local authority guidelines).

Included:

Eezibleed Multi-purpose Cap

The multi-purpose cap enables the standard Eezibleed to be 
used on a wider range of vehicles by providing a clamp-like 
grip on the brake fluid reservoir.

The cap can therefore be used on all brake fluid reservoirs 
which have any shapre opening up to 80mm.

Spare Parts Available:

Component 

Part Number 

Component 

Part Number

Bottle Cap: 

G4062/02 

Bottle Cap Seal: 

G4062/80

25mm Cap: 

G4062/07 

25mm Cap Seal: 

G4062/44

28mm Cap: 

G4062/11 

28mm Cap Seal: 

G4062/46

46mm Cap: 

G4062/15 

46mm Cap Seal: 

G4062/50

44/45mm Cap: 

G4062/21 

44/45mm Cap Seal: 

G4062/22 (3mm)

 

 

44/45mm Cap Seal: 

G4062/23 (1.5mm)

Multi-purpose Cap:  77042 

44/45mm Cap Seal: 

G4062/22 (3mm)

Brake Spanner 

2606

Tyre Pressure Gauge  5445

Содержание G4062 EEZIBLEED

















Отзывы: