Gunson Eezibleed 3
The one man brake bleeding system — it connects to your
car’s reservoir with one of the selection of caps provided in
this kit. The new brake fluid is pressurised by attaching the
Eezibleed tube to the spare tyre. Then release the brake bleed
valves in turn and let the air bubbles and old fluid flush out
through the drain tube. Pressure bleeding of brake and clutch
hydraulic systems is recommended by most manufacturers.
K
H
I
D
E
F
C
G
B
A
J
Figure 1
What’s in the box:
A
Bottle (pressure vessel for new brake fluid).
B
Bottle cap assembly (with tyre connector on 2m tube and 600mm reservoir tube).
C
Bleed tube set (3 pieces: 3.5mmØ x 670mm, 5.4mmØ x 320mm and 5.4mmØ x 183mm).
D
25mm cap & seal (suitable for Lockheed systems).
E
27mm cap & seal (suitable for certain VAG systems).
F
44/45mm cap &
2 seals
(for metal Girling reservoirs and all ATE systems).
G
46mm cap & seal (suitable for certain Girling systems).
H
Brass reservoir cap fitting.
I
Fibre washers X 2.
J
Lock nut.
K
Hook.
L
Multi-purpose cap.
M
Tyre pressure gauge 5-50 psi.
N
Brake spanner 10mm-11mm.
L
M
N
