Gundlach 1027 Series, Руководство пользователя, Страница: 8 / 21

•
• Simply line up the material
being cut with the
appropriate pre-marked
lines on the cutting table.
The easily removable
cutting table is covered with
an anti-skid rubber coating,
which allows the material
being cut to sit still on the
table while the cutting head
is pulled through it.
1. The bench saw is equipped
with a hinged guide rail that
allows the user to make
accurate mitre cuts.
2. To pivot the guide rail, lightly
loosen the palm grips at both
front sides of the saw.
3. Set the rail to the desired
angle.
4. Firmly re-tighten the palm
grips after setting the guide
rail.
Features:
Steps to make Miter Cuts:
!
The recommended cutting depth is ¼" below the cutting table surface. The
cutting clearance has been fixed from original design.
Setting the blade too low may damage the cutting table and if set too
high, the blade may grab the material being cut, causing damage and
possibly injury.
WARNING: !
Blade Diameter Cutting Depth
8” 1-1/2”
10” 2-5/8”
1. The blade shaft speed of
this saw is exclusively
designed for cutting with
diamond saw blades. The
saw may only be used for
cutting natural and artificial
stone materials, do not cut
wood or metal!
2. The saw uses diamond saw
blades with diameters up to
10”. Saw blades with
larger diameters must not
be installed on the saw.
3. Choose the correct type of
saw blade for the material
to be cut and the required
cutting depth.
THE CUTTING TABLE CUTTING DEPTH
14 13
CHOOSING THE RIGHT BLADE