Gundlach 1027 Series, Руководство пользователя, Страница: 10 / 21

D
O
’
S
&
D
O
N
’
T
S
F
O
R
B
L
A
D
E
S
Wet Cut Blades
Dry Cut Blades
In addition to the
following, always
follow wet
recommendations.
Do not make long
cuts with dry blades--
allow them to air
cool.
Do not use the edge
or side of blade to
cut or grind.
Do not attempt to cut
a radius or curve.
Do not cut too deep
or too fast into the
material.
Do not cut any
material not
recommended by
blade manufacturer.
Inspect blades daily
for cracks or uneven
wear.
Always use
appropriate blade for
material being cut.
Inspect arbor shaft
for uneven wear
before mounting
blade.
Always use blades
with the correct arbor
shaft size.
Ensure that blade is
mounted in the
correct direction.
Secure the blade to
the arbor with a
wrench.
Use proper safety
equipment when
operating the saw.
Periodically check the
blade for cracks or
bond fatigue.
Always have a
continuous flow of
water on both sides
of blade.
Do not operate the
saw without safety
guards in position.
Do not operate the
saw with blades
larger than 10".
Do not cut dry with
blades marked "Use
Wet".
Do not exceed
manufacturer's
recommended
maximum RPM.
Do not force blade
into material. Let
blade cut at its own
speed.
In addition to the
following, always
follow wet
recommendations.
Use appropriate
blade for material
being cut.
Inspect segment
blades for segment
cracking or loss.
Do not use damaged
blades.
Use proper safety
equipment when
operating the saw.
18
DO'S
DON'TS
DO'S DON'TS
17