9
2. Technical description - see Figure No. 1
1. Side tube
2. Bottom
3. PUSH/PUSH valve which allows infl ation/defl ation, pre-
ssure control and measurement by pressure gauge (see
Fig. 2)
4. Relief valve
5. Circular valve for small chambers (seats, foot rests, etc.)
6. Back support
7. Support attachment
8. Fixation strap for white-water kayaking (see Detail A)
9. Fixation strap attachment
10. Foot rest
11. Foot rest attachment
12. Seat
13. Kayak carrying handle
14. Luggage strap attachment
15. Manufacturer’s label
16. Yellow „WARNING“ label
17. bracket for single-seat boat version (K2 kayak)
18. Rope for seat and fi xation strap attachment
19. strap lug with clasp for single-seat version (K2 kayak)
ACCESSORY SUPPLIED WITH THE KAYAK:
Transport bag, 2 compression straps for strapping the folded
boat, user‘s manual with the warranty certifi cate, foam sponge
in a mesh bag, strap lug with a clasp for the single-seat versi-
on in K2 kayak, repair kit containing glue, patches and valve
adaptor.
Owner’s Manual
KAYAK K1, KAYAK K2
GB
VERSION 3/2016
1. Table of Specifi cations
Page 9
2. Technical Description
9
3. Infl ation Instructions
10
4. Using the Kayak
10
5. Storage of the Kayak
11
6. Treatment and Storage
11
7. Guarantee Conditions
11
8. Boat Repairs
11
9. Product Disposal Method
11
10. Packaging Disposal Method
11
11. Type Parameters Tag
- legend of symbols used
12
12. Safety Caution
12
• A recreational vessel designed for use on internal waterways with an expected wind strength reaching
Grade 4 on the Beaufort Scale inclusive and a determining wave height of up to 0.3 metres inclusive, with
occasional waves up to 0.5 metres of height caused e.g. by vessels passing by.
• The boat has been manufactured in compliance with the EN ISO 6185-1 Standard, Category IIIB.
• Related standards: EN ISO 10087, EN ISO 10240, EN ISO 14945.
TABLE OF CONTENTS:
Dear Customer,
This manual will help you to easily and safely master your vessel.
It contains a detailed description of the vessel, the supplied or built-in
equipment, its sets as well as information about its control and mainte-
nance. Please read it carefully, thereby getting to know the boat before
actually using it.
If this is your
fi
rst vessel or you have changed the type of vessel and
do not know this type well, please get acquainted with its maintenance
and control prior to your
fi
rst individual use of the vessel so that it is safe
and comfortable. Your dealer or the National Yacht Federation or club
will recommend you appropriate training courses or quali
fi
ed instructors.
Do not pull o
ff
until the expected sailing conditions (wind strength and
wave height) are appropriate for the construction category of your vessel
and you and your crew are able to control it in these conditions.
Please store this manual in a safe place and hand it over to the new
owner should you sell the vessel.
1. Table of specification
(Dimensions When Infl ated)
K1
K2
Length (cm)
340
390
Width (cm)
98
100
Peripheral cylinder diameter (cm)
30
30
Number of air chambers
3 +1+2
3 + 2 + 3
Approximate dimensions – packed in carry bag (cm)
70 x 45 x 28
70 x 45 x 30
Dimensions – packed in cardboard (cm)
76 × 50 × 34
71 × 61 × 36
Maximum operational pressure
0,025MPa [0,25Bar / 3,7PSI]
0,025MPa [0,25Bar / 3,7PSI]
Maximum weight (kg)
15
20
Maximum load (kg)
100
200
Maximum number of people
1
2
Draught (cm)
15
15
The highest anchor above surface (cm)
40
40
