Gulf Coast Spas 10000/BOCA GRANDE, Руководство пользователя

Страница: 12 / 28

Sarasota Console Diagram
Using the Sarasota Console
Pump Key: Press this key once to turn the pump on low speed. Press this key a second time to turn
the pump on high speed. Press this key a third time to turn off the pump. Unless manually turned off,
the pump automatically will shut off after 20 minutes. The indicator will illuminate while the pump is
running in high speed and flash while running in low speed. If the filter indicator is lit, a filtration cycle
has begun and you will not be able to turn off the pump.
Air Control: This easy-to-use, oversized knob determines the amount of air that is released in the
spa jet system when the pump is on. Turn the control to the left and more air will flow through the jets
providing maximum hydrotherapy. Turn the control to the right for less air in the jets and softer
hydrotherapy.
Light Key: This button turns the light on and off. When the light is on, the indicator above the button
will be lit. The light automatically will turn off after two hours.
Temperature Keys: Press the up arrow key to increase the temperature. Press the down arrow key
to decrease the temperature. The temperature can be adjusted in 1º increments between 41º F and
104º F (5º C and 40º C). The new setting will remain on the screen for five seconds as a confirmation.
During this time, the Temperature Set Indicator will be lit, informing you that this is the desired
temperature not the actual temperature. After five seconds, the display will return to the current
temperature reading. When the temperature drops to 1º F below the set temperature, the system will
call for heat. The Heat On Indicator will be lit while the heater is on and flash when there is a call for
heat and the heater has not yet been activated.
Freeze Protection: If the water temperature drops below 49º F, the pump and heater will turn on for
two minutes or until the temperature reaches 50º F. FrE will be displayed throughout this cycle. All
functions (except the alarms) will be disabled while the freeze protection is active.
High Temperature Protection: If the water temperature exceeds 115º F at the Hi-Limit sensor, the
system will display an HL message and the heater will turn off. If the water temperature exceeds 122º
F at the Hi-Limit sensor, all outputs will be shut off. After the water has cooled, press any key on the
console to resume normal operation. If the water temperature does not seem to be elevated, poor
12