Guldmann GLS5.1, Руководство пользователя

Страница: 9 / 32

9
©
G
ul
dm
an
n GB/US-1971/12/2019 • # 5
58
35
1_
2
©
G
ul
dm
an
n GB/US-1971/12/2019 • # 5
58
35
1_
2
5 .02 Safety functions
Only use the emergency stop button and emergency lowering functions in
emergencies. If it has been necessary to apply the emergency/safety func-
tions due to an error on the lifter, the supplier must be contacted prior to
using the lifter again.
In order to disconnect the lifter from mains supply, pull the mains plug out of
the power out-let.
Activating the emergency stop function
Should the lifter not respond to the func-
tions selected on the hand control when it is
in motion, press emergency stop. When the
emergency stop function is applied, the lifter
ceases to function. Switch the lifter on again
by turning the emergency stop button in the
direction of the arrow until it jumps out.
Activating the emergency lowering function
If the lifter fails to lower, activate the following:
1. Press the arrow key on the control box.
This functions as an emergency lowering
in case the hand control does not work.
If the lifting boom does not lower
2. Turn the red knob in the direction of the arrow
(Used if the actuator has a manual emergency
lowering device)
Use of brakes
The rear castors are fitted with brakes. Apply
the brake by stepping on the lower kick pedel.
To release the brake, kick the top part of the
kick pedal.
Only apply the brakes if the user is pushing
the lifter away with his/her feet on the foot plate
while the user is seated in the chair, wheel-
chair, toilet or commode.