Guldmann GLS5.1, Руководство пользователя

Страница: 12 / 32

12
©
G
ul
dm
an
n GB/US-1971/12/2019 • # 5
58
35
1_
2
©
G
ul
dm
an
n GB/US-1971/12/2019 • # 5
58
35
1_
2
7 .01 Assembly instruction
Guldmann recommends that the person making the assembly of the Active
Lifters have a basic mechanical understanding.
Unpack the lifter on to a level surface and gently remove cable ties and
protective-foam.
Assembling mast/chassis
Insert the mast
(pos. 1)
and lifting arm into
the chassis
(pos. 2)
, make sure that the mast
hits the chassis in the bottom of the chassis
tube.
1
2
Tighten the assembly screw (pos. 3) by
turning the handle Clockwise, push to get a
firm grip, pull to adjust the handle positio 3
Fitting actuator
Fasten the lifting actuator base (pos. 4) on
to the mast by inserting the Pipe (pos. 5) ,
secure bolt (pos. 6) and locknut (pos. 7) by
tightening them.
Complete by adding protective plastic caps
(pos. 8) to not and bolt.
Actuator motor housing must face right seen
from the front.
Fasten the actuator on to the lifting arm in the
same way.
8
4
5
7
6
Mounting of connectors for motors
Insert connector from the lifting actuator to
port 1 (pos. 9) on the control box.
Insert the cable from the lifting actuator into
the cable clips. (pos. 10)
10
9