Guldmann GLS5.1, Руководство пользователя

Страница: 6 / 32

6
©
G
ul
dm
an
n GB/US-1971/12/2019 • # 5
58
35
1_
2
©
G
ul
dm
an
n GB/US-1971/12/2019 • # 5
58
35
1_
2
4 .02 Safety precautions
• Risk of entrapment between the top of the lifting actuator and lifting arm.
• Risk of entrapment between the legs and the chassis when adjusting the
legs.
Fig . 2
Fig . 1
4 .03 Checklist before use
• The lifter must be off charge.
• Check the lifter is lifting and lowering and the legs are opening and closing, if
you hear the audio warning (a beeping sound) DO NOT USE THE LIFTER –
it needs to be charged.
• Check that the green light located on the hand control is illuminated when the
lifter is activated.
• Check that the emergency stop and lowering is working (See section 5.02
safety features) .
• Make sure the lifter is running freely.
• Check the slings for damage or fraying.
Once you have fitted the sling (See section about placing the sling in the
manual for Standing sling and Hip Support sling) you are ready to lift.
With the user in a seated position
• If the user is in a wheelchair or commode chair the brakes must be applied.
• Position the lifting boom at lowest position and introduce the lifter square onto
the user. The helper should be positioned at the side of the lifter (to ensure
the lifter does not run over the user’s feet).
• Open the lifter’s chassis leg width adjustment to allow access around the
chair.
• Position the user’s feet flat onto the foot plate and adjust the knee pad - the
top of the knee pad should be level with the top of the shin, two fingers below
the knee joint.
• OPTIONAL – if the user has a tendency to have involuntary movements you
can use the calf strap to ensure the users’ feet do not come off the foot plate.
If the calf strap is not in use, fasten the strap to the back of the knee pad
(avoiding loose straps).