Guldmann GL2, Руководство пользователя

Страница: 9 / 20

9
©
Guldmann
G
B
-1
25
5/
08
/0
9
•
#
944120
©
Guldmann
G
B
-1
25
5/
08
/0
9
•
#
944120
2 .02 Operating mobile hoist GL2 and GL3
Hand control and indicator lamp
The hoist switches on automatically when pressing the
hand control, and the green indicator lamp will light up
when hoist is switched on (see illustration in “Rechar-
ging” section).
The hoist will switch off automatically approx. 1 min.
after use.
NB : If the emergency stop function has been activated,
press the hand control twice.
Adjustment of chassis/width adjustment
• Adjusting the width of the mobile hoist GL2 chassis should be carried out as
follows: stand alongside the hoist and pull/push handle to adjust chassis to
the desired position.
• Use max. width setting when lifting to/from wide chairs, or as necessary when
lifting to/from bed, toilet and fl oor.
• On mobile hoist GL3, chassis width is adjusted via the hand control.
Use of brakes
• The back castors are fi tted with brakes. Apply the brake by pushing the brake
pedal into the vertical position.
• To release the brake, push the brake pedal into the horizontal position.
• Do not apply brakes when lifting or lowering.
• Always apply brakes when parking.
2 .03 Safety functions
Only use the emergency stop and emergency lowering functions in emer-
gencies. Should it be necessary to apply the emergency/safety functions, the
supplier must be contacted prior to using the hoist again.
Activating the emergency stop function
Should the hoist not respond to the functions selected on
the hand control when it is in motion, press emergency
stop .
When the emergency stop function is applied, the hoist
ceases to function.
Switch the hoist on again by turning the emergency stop button in the direc-
tion of the arrow until it springs up. Press twice on the hand control and the
hoist is ready for operation.