Guldmann GL2, Руководство пользователя

Страница: 11 / 20

11
©
Guldmann
G
B
-1
25
5/
08
/0
9
•
#
944120
©
Guldmann
G
B
-1
25
5/
08
/0
9
•
#
944120
©
Guldmann
G
B
-1
25
5/
08
/0
9
•
#
944120
©
Guldmann
G
B
-1
25
5/
08
/0
9
•
#
944120
2 .05 Connection of charger
Recharging in different areas
Lift charger out of bracket and place on a dry surface. Connect charger plug
to mains. Now insert the female connector into the hoist connection point for
recharging. This point is labelled 24V DC.
Should you wish to recharge the hoist in different places, hang charger on the
mast.
When charger is not in use, the mains cable should be wound round the
charger bracket.
Permanent charging area
Should you wish to park and recharge the hoist in one place only, the charger
can be mounted to the wall. Connect charger plug to mains socket.
Now connect female connector to hoist connection point for recharging. This
point is labelled 24V DC.
When charger is not in use, the spiral cable should be wound round the
charger bracket.
When the hoist has to be stored away, the charger should always be placed
on the hoist.
2 .06 Accessories for the hoist
Lifting slings
Ask for special brochure from supplier or manufacturer.
3 .00 Dismantling and Transport
3 .01 Dismantling the hoist
When the mast is lifted out of the base, the plug from the actuator should
always be connected to the mast. The battery box can be removed from the
mast before lifting the mast out of the base.
The battery box hangs unsupported on the mast. It is kept in position by the
plugs, so never turn the mast upside down when there are no plugs con-
nected to the mast.
3 .02 How to transport the hoist?
The hoist can be dismantled for transport and storage, see section 3.1.
3 .03 How to package the hoist for transport?
Guldmann recommends that the dismantled hoist is always transported in its
original packaging.