21
Picture 21 Picture 22
4.2.6 When the file reaches the apex, adjust the rubber piece set on the endo file to
the reference point (incisal edge or fossa edge), then pull out the endo file, measure
the length between the top of the file and the rubber piece, and this is the working
length of the tooth. It also can be use with the touch probe instead of file clip, when
it is inconvenient to measure the back teeth [Picture 23].
Picture 23
4.2.7 Please remove the lip hook,file clip or touch probe after shutting down.
4.2.8 The components that touch body must be autoclaved under high temperature
and high pressure. The shell and measuring wire should be cleaned by 75% alcohol.
Attention:
Avoid the silk-screen when cleaning.
