Guild PDH26G, Инструкция по эксплуатации, Страница: 9 / 16

Customer Helpline 0333 3201989
9
F1
E
F2
Operating Instructions
5. ON/OFF SWITCH (SEE FIG E)
Depress the switch to start the tool and release it to stop your tool.
6. FUNCTION MODE SELECTION
Hammer drill function (SEE FIG F1, F2)
1)For drilling concrete, masonry etc, press the lock button (a) and rotate the selector
switch to make sign “ “ point to the triangle. (SEE FIG F1)
Note: You must press the selector switch lock button before adjusting the selector
switch. If the selector switch cannot go into the required position, switch on your
hammer a little, then adjust the selector switch again.
2)Turn the hammer or drilling action selector switch pointing to the hammer action
“ “ position. (SEE FIG F2)
3)You are now set up for hammer drilling into masonry.
a