Guild PDH26G, Инструкция по эксплуатации, Страница: 10 / 16

Customer Helpline 0333 3201989
10
Drilling function (SEE FIG G1, G2)
1)Press the lock button (a) and rotate the selector switch to make sign “ “ point to
the triangle. (SEE FIG G1)
2) Turn the hammer or drilling action selector switch pointing to the drilling action “
“ position. (SEE FIG G2)
3)You are now set up for drilling function.
Chisel function (SEE FIG H1, H2)
1)For chipping, grooving or demolition operation, press the lock button (a) and then
rotate the selector switch make sign “ “ pointing to the triangle. (SEE FIG H1)
2)Turn the hammer or drilling action selector switch pointing to the hammer action “
“ position. (SEE FIG H2)
3)You are now set up for chisel work using Chisel action.
WARNING: You must make sure that the selector switch is positively locked in
chisel mode position. If not, it could cause a hazard.
Note:No function if rotate the hammer and chisel action selector(4) to mark sign T and
rotate the hammer or drilling action selector switch (5)pointing to drilling action x
position
Operating Instructions
H1
G1
H2
G2
a
a