Guild PDH26G, Инструкция по эксплуатации, Страница: 7 / 16

Customer Helpline 0333 3201989
7
NOTE: NOTE: Before using the tool, read the instruction book carefully.
Intended Use
This tool is intended for hammer drilling in concrete, brick and stone as well as for light
chiseling work. It is also suitable for drilling without impact in wood, metal, ceramic and
plastic.
1. ADJUSTING THE AUXILIARY HANDLE (SEE FIG A)
Slide the handle onto the hammer and rotate to the desired working position. To clamp
the auxiliary handle rotates the handle clockwise. To loosen the auxiliary handle rotate
the handle anti-clockwise.
WARNING: For your personal safety we recommend using the auxiliary handle at all
times.
2. INSTALLING THE DEPTH GAUGE (SEE FIG B1, B2)
The depth gauge can be used to set a constant depth to drill (hammer). Fit the drill bit
into the chuck. Depress the locking button on the handle and insert the depth gauge
Operating Instructions
B1
A
B2
Toothed side of hex hole
marking on the grip base
Toothed side of
the depth gauge