GUILCOR AR006683, Инструкция по эксплуатации

Страница: 14 / 30

14
Barometric pressure unit choice
It is possible to measure barometric pressure at hPa, PSI, inHg, mBar, oz/in
2
, mmHg, inH
2
O
and kPa. There is shown preset unit. It is possible to change it after „SET“ key pressing.
preset to hPa preset to PSI preset to inHg preset to mBar
preset to oz/in
2
preset to mmHg preset to inH
2
O preset to kPa
Setting of pressure correction for altitude
If is there necessary to read value of barometric pressure corrected with respect to altitude, it is
possible to set corresponding pressure offset for this altitude. It is possible to change it after “SET”
key pressing. Pressure correction value is then automatically added to measured pressure value. See
chapter
“Error States of the device”
at page 22, Error 2.
correction for altitude pressure correction value is from
-25,0 to 650,0 hPa
-0,363 to 9,427 PSI
-0,74 to 9,19 inHg
-25,0 to 650,0 mBar
-5,8 to 150,8 oz/in 2
-18,8 to 487,5 mmHg
-10,0 to 261,0 inH
2
O
-2,5 to 65 kPa
Show temperature at LCD display
This item provides to choice if actual measured temperature may be displayed at LCD display or
not. It is possible to change it after „
SET
“ key pressing.
show value on LCD don’t show value on LCD