16
specific enthalpy
5.7.
Restore to „Factory default“
This item provides regulator restoring to factory setting. Press „
SET
“ key, select „
YES
“ and
confirm it by pressing of „
SET
“ key. It reset regulator parameters to following values:
communication protocol:
Modbus RTU
regulator address:
1
communication speed:
9600Bd, no parity, 2 stop bits
value assigned to Relay1 and Relay2:
none
password for setting through keys:
0000
display:
on
value shown at first LCD line:
temperature (temperature/pressure),
by device type
value shown at second LCD line:
relative humidity / dew point temperature
temperature unit:
°C
pressure unit:
hPa
correction for altitude:
0 hPa
(absolute pressure)
computed value preset:
dew point
temperature
restore to factory default
6. Description of communication protocols
Detailed description of each communication protocols including examples of communication is
available into document “
Description of communication protocols”,
which is available to download
at
, see detailed description of appropriate device type.
After switching ON the power of the device it can last up to 3 s before the device starts to
communicate and measure !!!
