49
GPS options and settings
Select GPS Parameters to enter the settings screen for the GPS options.
There are 3 options for the GPS
Interface/Unit setting.
Built-in, this option selects the built-in
DGPS module. Select the correct SBAS
Region for your area.
COM Port, this option is selected for an
RTK GPS input via the serial COM port.
Once this option is activated, various
parameters will be activated, see below.
USB, select this option if a simple GPS
antenna is attached to the USB port.
Choose the correct SBAS Region for your
measurements. The different regions are
displayed on the map as you toggle
between them.
Note: The correct GPS output settings are seen on top of the GPS parameters screen.
