background image

 

 

Too heavy charging current at the beginning of charging  

1. 

Watch out the charging current if it is high even after 15 - 
20 minutes, it may mean that the charge would not hold 
Have the battery checked at a specialist’s. Replace the 
battery. 

 

Too weak charging current . 

1. 

Try to adjust the charging current control higher. 

 
 
 

Ammeter pointer touches the lowest position of the scale  

1. 

Have the battery checked at a specialist. Replace the 
batteries 

2. 

Ensure that the mains voltage is equal to the desired 
value 

 

Ammeter does not indicate. 

1. 

Clean the terminals and put the clamp on again.  

2. 

Have it checked at a specialist´s . Replace the battery. 

3. 

Check on the charger working ability on a perfect 
charged battery. 

 

Overloading causes 

1. 

Wrong connection of pliers to the battery. 

2. 

Accidental or indirect contact of pliers with themselves. 

3. 

Battery being deeply or strongly discharged. 

4. 

Battery being deeply discharged and with a higher 
capacity than the charger can reach. 

5. 

Battery being defective or damaged (e.g. short-circuit of 
internal elements) 

 

Inspections and Maintenance 

 

 

Unplug before any work on the unit. 

 

Use a wet cloth to clean the plastic parts. Do not use 
detergents, solvents and sharp articles.  

 

Use a soft brush or a paint brush to remove the settled 
dust from the vent and moving parts.  

 

Lubricate the wheels regularly! 

 

Inspections and Maintenance Safety Instructions  

 

After every use  

Clean the vents and moving parts from dust  
 

Regularly  

Oil the moving metal parts (multi-purpose oil)  
 

Regularly 

Check all the screws to see if they are tight. 

 

Service 

 

Any technical questions?

 

Complaint?

 

Do you need spare 

parts or operation manual?

 

Go to our website 

www.guede.com

 and the section 

Service

 

will help you quickly and without bureaucracy. Please, help us 
to help you. In order to identify your device in case of 
complaint, please indicate serial number, order number and 
year of manufacture. All information is available on the 
product label. To have all information always at hand, put 
them down. 

 
Serial number: 
Order number: 
Year of manufacture: 
 
Phone:   

+49 (0) 79 04 / 700-360 

Fax: 

 

+49 (0) 79 04 / 700-51999 

E-Mail:  

[email protected] 

 
 
 
 
 
 
 

Notes: 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

13

Содержание V 1201 C








Отзывы: