![Gude 17306 Скачать руководство пользователя страница 19](http://html.mh-extra.com/html/gude/17306/17306_translation-of-the-original-instructions_2277357019.webp)
Training
Using the appliance only requires appropriate instructions
by an expert or reading the Operating Instructions. No
special training necessary.
Service
Any technical questions? Complaint? Do you need
spare parts or operation manual?
Go to our website
www.guede.com
and the section
Service
will help you quickly and without bureaucracy.
Please, help us to help you. In order to identify your device
in case of complaint, please indicate serial number, order
number and year of manufacture. All information is
available on the product label. To have all information
always at hand, put them down.
Serial number:
Order number:
Year of manufacture:
Phone:
+49 (0) 79 04 / 700-360
Fax:
+49 (0) 79 04 / 700-51999
E-Mail:
Important information for the customer
Please be sure to know that returning the product in or
after the warranty period must be made in the original
packaging.
Maintenance and storing
To clean the appliance, use a smooth and fine soap water
solution. Prevent any direct contact of aggressive cleaning
agents with the appliance. No aggressive, volatile or
caustic cleaning agents may be used.
Have the socket heater checked by a qualified authorised
expert once a year.
The hose must necessarily be replaced if damaged.
Protect the appliance against moisture and dust.
If the appliance has not been used for a long time, remove
it from the gas bottle, cover the heater surface and put it to
a dry, safe place inaccessible to children.
Troubleshooting
Failure
Cause
Remedy
No gas
Gas bottle is
empty
Change the gas
bottle.
Valve on the gas
bottle is closed.
Open the valve.
Safety valve on
building dryer is
closed
Try restarting.
Burner flame has
extinguished
during operation
Thermal element
has not been
warm enough.
Try restarting.
Gas bottle is
empty
Change the gas
bottle.
Wind or draught
has extinguished
the flame.
Put the appliance
out of reach of wind
and draught, let it
cool down for a
couple of minutes
and try to restart it.
19