Labels
G
ua
rd
ia
n
Fa
ll
Pr
ot
ec
tio
n
6
30
5
S.
2
31
st
S
t.
, K
en
t,
W
A
9
80
32
p
ho
ne
: (
80
0)
4
66
-6
38
5
f
ax
: (
80
0)
6
70
-7
89
2
w
w
w
.g
ua
rd
ia
nf
al
l.c
om
7
85037 (Rev. J)
Training of Authorized Persons to correctly erect, disassemble, inspect, maintain, store, and use equipment
must be provided by a Competent Person. Training must include the ability to recognize fall hazards, minimize
the likelihood of fall hazards, and the correct use of personal fall arrest systems.
NEVER use fall protection equipment of any kind to hang, lift, support, or hoist tools or equipment, unless
explicitly certified for such use.
Equipment subjected to forces of fall arrest must immediately be removed from use.
Age, fitness, and health conditions can seriously affect the worker should a fall occur. Consult a doctor if there
is any reason to doubt a user’s ability to withstand and safely absorb fall arrest forces or perform set-up of
equipment. Pregnant women and minors must not use this equipment.
Physical harm may still occur even if fall safety equipment functions correctly. Sustained post-fall suspension
may result in serious injury or death. Use trauma relief straps to reduce the effects of suspension trauma.
Connections must be selected and deemed compatible with Temper Anchor
by a Competent Person. Refer to instructions for proper connection methods.
Prior to use, read and understand all manufacturer’s instructions
provided with equipment at time of shipment from manufacturer.
Compatible with all applicable OSHA 1910 and 1926 Subpart M,
ANSI Z359.1-2007, and ANSI A10.32-2012 regulations.
User must inspect prior
to each use. Competent
Person must inspect at
least every 6 months.
Competent Person to
initial year and month
of inspection
Date of first use:
_____ / _____
Avoid contact with all hazards, including, but not
limited to, electricity, chemicals, and heat.
NEVER for use with horizontal lifelines.
MAXIMUM 1 connection per Temper Anchor.
IMMEDIATELY remove from use if exposed to forces of fall arrest.
!
WARNING
90040 (Rev. E)
May be used in multiple installation applications.
Always use new fasteners for each installation.
Minimum substrate thickness requirements:
Wood: 3/4” CDX or better. Metal: 20g or better.
Refer to instructions for proper installation
methods and fastener requirements.
Temper Anchor MUST lie flush against substrate.
Conexiones deben ser seleccionados y considere compatible con Temper
Anchor por una Persona Competente. Consulte las instrucciones de los
métodos de conexión adecuados.
Andes del uso, lea las instrucciones del fabricante y entendido todas
provisto de equipo al momento del envío desde el fabricante.
Compatible con todas las normas de OSHA 1910 y 1926 Subparte M,
ANSI Z359.1-2007, y ANSI A10.32-2012 règlements.
El usuario debe inspeccionar
cada archivo andes de usar.
Persona Competente debe
inspeccionar por lo menos
cada 6 meses. Persona
Competente a mes y el
año inicial de la inspección.
Fecha de primer uso:
_____ / _____
Evite el contacto con todos los riesgos, incluyendo, pero no limitado a,
la electricidad, los productos químicos, y el calor.
NUNCA para su uso con líneas de vida horizontales.
MÁXIMO 1 contacto por Temper Anchor.
Retirar INMEDIATAMENTE del uso de la fuerza si se expone a caer arresto.
!
ADVERTENCIA
90040 (Rev. E)
Se puede utilizar en aplicaciones de sistemas múltiples.
Siempre use fijaciones nuevas para instalar cada archivo.
Requisitos mínimos del espersor del sustrato:
Madera: 3/4” CDX o mejor. Metal: 20g o mejor.
Consulte las instrucciones para la instalación de
métodos apropiados y los requisitos de sujeción.
Temper Anchor DEBE ras de sustrato se une.
www.guardianfall.com
1-800-466-6385
6305 S. 231st St.
Kent, WA 98032
Temper Anchor
Materials:
Zinc-plated steel
Date of manufacture:
Capacity range
(including all equipment): 130-420 lbs.
Part #:
www.guardianfall.com
1-800-466-6385
6305 S. 231st St.
Kent, WA 98032
Temper Anchor
Materiales:
Acero Zincado
Fecha de Fabricación:
Rango de Capacidades
(incluyendo todos los equipos): 130-420 lbs.
Part #:
