Guardian DCR2, Инструкция по установке и руководство пользователя

Страница: 14 / 20

14
Setting Auto-Closing Operation / Courtesy Light / Buzzer Responses
Auto-closing timer is turned off as default (the screw control is at fully “-”)
1. Optional Photo Eye* must be selected and properly connected and aligned to enable Auto
-Closing Operation. (* Contact your local operator supplier)
2. Turn the screw towards ‘+’ position to set to appropriate delay time (max. 2-1/2 minutes)
for the door to auto-close after fully opened.
Photo Eye must be selected and connected
3. When the delay time is reached within the door at fully open position, the operator beeps
twice and closes the door automatically.
1
2
3
x2
Courtesy Light / Beeper Responses
Operation / Condition
Courtesy Light / Beeper Responses
Operator is initially plugged-in (no travel limits stored) Flash x 5
Reconnecting power (with travel limits stored) Flash x 3
“RADIO SET” button is pressed Beep x 1
Upon activation Light On for 2.5 minutes
Upon activation by remote transmitters Beep x 1, Light On for 2.5 minutes
Remote Transmitter / Keyless Entry PIN code accepted Beep x 2
Operator is triggered without programming Beep x 5
Door travels with abnormal speed Beep x 12 (1 beep / second)
Photo Eye System is obstructed during door-closing Beep x 20 Medium Beep
The door is obstructed during travel Beep x 25 Rapid Beep
Photo Eye Selection
Jumper off — Selected
Jumper on — Unselected
UP RADIO SET FORCE
4