ENGLISH
ENGLISH
44
45
Operator’s manual | Knapsack Sprayer - Balance
Operator’s manual | Knapsack Sprayer - Balance
4.1. Spray Boom Assembly
Figure 6.
Activation rod assembly sequence.
Figure 8.
Belt adjustment procedure.
Remove the set, spray boom and nozzle from the packaging inside the equipment box and proceed with the assembly as described in the
steps below (Figure 7):
1
st
-
Fit the tip filter (A) into the inside of body of the curved tip (B) and then proceed to fix nut and spray tip set (C) in the body of the curved
tip by threading;
2
nd
-
Attach the body of the curved tip (B) to either end of the spray boom proceed with the fixation with the guide nut (D);
3
rd
-
Fit the other end of the spray boom into the discharge valve (E) and fix by threading the nut guide (D).
Figure 7.
Spray boom assembly sequence.
A
B
B
D
D
E
A
C
A
B
C
5. Adjusting of the Belt Position according to the Operator Height
6. Instructions for Correct and Safe Use
This equipment has 2 belt position adjustment options. We recommend that the user, during the assembly of the equipment or even during
first use, test the 2 options and choose the one that provides greater comfort. To change the height positions/adjustment of the belts, proceed
as follows:
Figure 8.A -
Pull the belt ends of the fittings on the equipment tank and remove the plastic locks (indicated by the arrow) which is found
housed in the ends of the belts, releasing them totally;
Figure 8.B -
Choose the new adjustment position in the tank, place the belts and insert the plastic locks in the end of the belts. Then reattach
the belts with the plastic locks in the equipment tank.
This equipment should be used only with agrochemicals approved by the regulatory authorities of your country for use with costal sprayers.
For information about the possibility of using the equipment in the application of other substances, consult the manufacturer.
Guarany does not recommend the use of chemicals based on flammable solvents, fertilizers in high concentrations, such as ammonium
sulfate and nitrate (ammonium salts) and lime sulfur in high concentrations.
The use of personal protective equipment (PPE) is mandatory during the handling and application of the chemical products.
Read the
chemical product label and package leaflet to know which PPEs to use, and other forms of protection during the handling of these products.
1
st
-
After assembling of the equipment, fill the tank with the prepared chemical products, passing the liquid through the supply filter
(item 2);
ATTENTION
ATTENTION
Plastic locks