30
Wires from Accessory
1
ON
2
3
4
15
CHARGING
POWER
STATUS
RF
PULL-PUSH
MODE1
MODE2
LOCK/BEACON
OFF
120
MIN
MAX
STALL FORCE
CLOSE TIME
SET
LIMIT
LEARN
REMOTE
AUX OUT
SOLAR
PANEL
18VAC
RECR
GRN
BL
K
RED
EXI
T
SAFET
Y
EDGE
CY
CL
E
COMMO
N
LINK
Connecting Accessories
The Mighty Mule® 350 can accept NORMALLY OPEN CONTACT accessories, such as; Push Button Entry Devices
and Key Pads.
Refer to the accessory manufacturer’s instructions for
information about installing these devices on a vehicular
gate.
Make sure the power to the opener is turned off
before connecting safety device wiring to the
terminal blocks. Unplugging the transformer
does not turn power to the opener OFF.
Accessory Input Connection:
Connect one of the accessory wires to the
COMMON
(COM)
terminal and the other to the
CYCLE
terminal on
the Mighty Mule® 350 control board.
Each activation of the accessory will cause the
gate to cycle as follows:
OPEN STOP CLOSE STOP
If not connecting accessories skip to next section.
1
ON
2
3
4
15
CHARGING
POWER
STATUS
RF
PULL-PUSH
MODE1
MODE2
LOCK/BEACON
OFF
120
MIN
MAX
STALL FORCE
CLOSE TIME
SET
LIMIT
LEARN
REMOTE
AUX
OUT
SOLAR
PANEL
18VAC
RECR
GRN
BL
K
RED
EXI
T
SAFET
Y
EDGE
CY
CL
E
COMMO
N
LINK
Wiring the Automatic Gate Lock
to the Mighty Mule 350
Wire from LOCK
RED to AUX OUT (+)
BLACK to AUX OUT (–)
NOTE:
The LOCK Control Board is
NOT used with the Mighty Mule 350.
Automatic Gate Lock
(FM143)
Make sure the power switch to
the opener is turned OFF before
connecting gate lock wiring to the
Mighty Mule 350 terminal blocks.
The control board that comes with the
Mighty Mule Automatic Gate Lock is
not used when connecting the lock to the
Mighty mule 350.
Connect the RED wire from the lock to the
AUX OUT (+) terminal, and the BLACK
wire from the lock to the AUX OUT (–)
terminal on the Mighty Mule® 350 control
board.
Be sure DIP SWITCH #4 is set to the OFF
position.
The Automatic Gate Lock
unlocks and locks automatically as gates open and close. Used with the Mighty Mule®
system for maximum stability and security. Comes with a keyed manual release. Recommended for gates over 8 ft.
long. Ideal for animal enclosures or high wind areas.