Gtec NS3000 Series, Руководство пользователя

Страница: 41 / 69

NS3000 UPS 60KVA~120KVA User Manual
35
Submenu
Name
Contents Meaning
RS232 Protocol Selection
SNT Protocol, ModBus Protocol, YD/T
Protocol and Dwin
（
For factory use
）
Baudrate
Setting the baudrate of SNT, ModBus
and YD/T
Modbus Mode
Setting mode for Modbus:ASCII and
RTU selectable
Modbus parity Setting the parity for Modbus
USER
Output voltage
Adjustment
Setting the Output Voltage
Bypass Voltage Up
Limited
Up limited working Voltage for Bypass
，
se10%
，
+15%
，
+20%
，
+25%
Bypass Voltage Down
Limited
Down limited working Voltage for
Bypass
，
settable:-10%
，
-15%
，
-20%
，
-30%
，
-40%
Bypass Frequency
Limited
Permitted working Frequency for
Bypass
Settable
：
+-1Hz
，
+-3Hz
，
+-5Hz
Dust Filter Maintenance
Period
Setting Dust Filter Maintenance Period
BATTERY
Battery Number Setting the number of the battery
（
12V
）
Battery Capacity Setting of the AH of the battery
Float Charge Voltage/Cell
Setting the floating Voltage for battery
cell
（
2V
）
Boost Charge
Voltage/Cell
Setting the boost Voltage for battery cell
（
2V
）
EOD(End of discharge)
Voltage/Cell,@0.6C
Current
EOD voltage for cell battery,@0.6C
current
EOD(End of charge)
Voltage/Cell,@0.15C
Current
EOD voltage for cell battery,@0.15C
current
Charge Current Percent
Limit Charge current (percentage of the rated
current)
Battery Temperature
Compensate
Coefficient for battery temperature
compensation
Boost Charge Time Limit Setting boost charging time
Auto Boost Period Setting the auto boost period
Auto Maintenance
Discharge Period
Setting the period for auto maintenance
discharge
SERVICE System Mode
Setting the system mode: Single ,
parallel, Single ECO, parallel ECO,LBS,
parallel LBS
RATE
Configure the rated
Parameter
For the factory use
CONFIGURE Configure the system For the factory use