INSTALLATION
11
ADICOS HOTSPOT-1000
410-2410-001 EN11
Vibration
The electronics contained in the
ADICOS HOTSPOT-1000
can be damaged when subjected
to vibration. If there are any sources of strong vibration near where the
ADICOS HOTSPOT-1000
is mounted, the detector has to be positioned such that it is immune to the vibration.
Electromagnetic radiation
The electronics contained in the
ADICOS HOTSPOT-1000
can be impaired by electromag-
netic radiation. So do not place the detector near high voltage equipment. And always use
shielded cable.
5.1.2
To Ensure Proper Detection
To ensure reliable and correct operation of the
ADICOS HOTSPOT-1000
as well as proper
detection, always consider the following factors when choosing a place to attach the device.
Visibility
The
ADICOS HOTSPOT-1000
must always have a clear, unobstructed view of the material to
be monitored. If the object to be monitored is obscured or is not within the visibility range of
the
ADICOS HOTSPOT-1000
, the device will not be able to detect any heat sources and
trigger an alarm.
Distance and detection area
The detection area is determined by the distance between the detector and the object to be
monitored. So the distance or the installation location should be selected such that the object to
be monitored can be covered completely by the detector’s field of view. This ensures maximum
sensitivity.
Detection area when positioned vertically: tan(26.5) x 2 x height
Example:
An 80 cm wide conveyor belt is to be monitored to detect any moving hot spots. So the
HOTSPOT detector should be installed about 80 - 100 mm above the transport belt.
Distance [m]
Object resolution [cm]
Width of detection area [m]
1
3
1
3
10
3
5
16
5
10
32
10
15
48
15
Содержание ADICOS HOTSPOT-1000
Страница 36: ......
