manualshive.com logo in svg

GTE ADICOS HOTSPOT-1000, Установка, эксплуатация и обслуживание, Страница: 11 / 36

Поделиться
Скачать
GTE ADICOS HOTSPOT-1000 Скачать руководство пользователя страница 11

6

ADICOS HOTSPOT-1000

410-2410-001 EN11

PRODUCT DESCRIPTION

Type

Pixels

Capture angle

Object resolution

at a distance 

of 5 meters

HOTSPOT-1000

32 x 31

53° x 52° 

14 cm

3.3 

Potential Uses

3.3.1  Moving Objects

Because of the quick reaction time of 100 milliseconds, the 

ADICOS HOTSPOT-1000

 is ideal 

for monitoring moving objects, e.g. transport and conveyor belts. This means that hot spots on 

transport and conveyor belts can be found early.

When installing the 

ADICOS HOTSPOT-1000

, ensure that the detector always has a clear, 

unobstructed view of the transport or conveyor belt to be monitored. If it is not possible to scan 

and monitor the entire moving object with a single 

ADICOS HOTSPOT-1000

, you can install 

multiple detectors, positioning them such that together they can scan and monitor the whole 

object.

3.3.2  Stationary Objects

The 

ADICOS HOTSPOT-1000 

can monitor immobile, stationary objects as well, ensuring 

early detection of any hot spots that may be forming. The detector also senses overheated 

drives, shaft bearings and reels early.

And the 

ADICOS HOTSPOT-1000 

can be used in conjunction with the 

GSME

 to monitor bulk 

goods stored above storage sites or in silos and to quickly detect any hot spots.

As with moving objects, you can use multiple 

ADICOS HOTSPOT-1000

s at the same time, if it 

is not possible to scan and monitor the entire area required with only a single device.

3.4 

Connecting Purge Air 

The 

ADICOS HOTSPOT-1000

 optics can be found in an air settling tube that prevents dust 

from collecting on the lens at low air flow or turbulence. But when the air flow is greater or 

the air rate is faster, the air settling tube can no longer prevent the 

ADICOS HOTSPOT-1000

 

optics from getting dirty. The 

ADICOS HOTSPOT-1000

 has a purge air connection to ensure 

that the optics stay clean even when exposed to strong turbulence and high wind speeds. 

It is essential to provide a continuous supply of purge air as long as dust residue can be an-

ticipated.

Содержание ADICOS HOTSPOT-1000





































Отзывы:

Нет отзывов