Page 29
Terminal Setup
Testing Biometric Reader
The GT8 includes a utility to display the output of a Biometric reader to validate correct functioning and
setup. The utility is accessed from the ‘Biometric’ dialogue.
1.
Enter terminal set up (press admin icon).
2.
Enter PIN (the default is 1905).
3.
Select settings.
4.
Select Biometric.
5.
Click ‘Test Reader’ (top right).
Note:
Clicking the other menu items provides further
information about the installed Biometric reader.
6.
Click Test Reader
7.
Place finger on reader as shown.
8.
The test fingerprint is displayed.
9.
Press Test Reader to retest if required.
10.
Click anywhere outside of the test reader window
to close.
Note:
Test fingerprints are not saved.