Page 23
Terminal Setup
Accessing the Terminal Setup
Allow the Terminal to boot and select the ‘Admin’ icon. A PIN is required to enter setup mode, the default is
1905. From the Apps menu select ‘settings’ as shown below.
Note:
If installed, the terminal will automatically load the application after a few seconds. If this happens you
will need to restart the terminal to access the admin section.
1.
Enter terminal set up (press admin icon)
2.
Enter PIN (the default is 1905)
Note:
The default PIN is 1905 however, it is
recommended that this is changed since the default
PIN appears in freely available documents. To
change the PIN select the ‘Launcher’ item on the
Setup menu.
3.
Select settings
4.
Scroll down to Launcher and select.
5.
Select ‘PIN used by administrator to access
settings’
6.
Enter new PIN and click OK