Page 20
System Start-up
When the system is powered on, a bootloader runs which loads the Android operating system. This runs
start-up scripts to set up and configure the terminal and to start enabled services.
Once the unit is fully booted, the initial screen gives you the opportunity to enter the Terminal Setup by
pressing the cog icon on the launcher start-up screen as shown below.
After a short delay the terminal will automatically proceed to run the installed application. If no application is
configured to auto-start the Terminal will stay on the launcher start-up screen.
Note:
If an application is installed but not configured the terminal continues to switch between the initial
screen and the application set up screen.
Terminal Setup Navigation
Navigating using the touch screen.
Touch icon to open menu.
Touch label text to open a menu item e.g.
This opens the item options menu e.g.
To activate/deactivate a toggle switch touch it.
To go back touch the back arrow displayed at
the top left or bottom centre (location varies
depending on menu item opened).
To return to initial screen (from any screen) touch
the circle button on the bottom menu.
Note:
The square button (in the bottom menu) is
reserved for future functionality and is currently
inactive.
Touch and drag your finger across/down/up
the screen to scroll left/right or up/down to view
hidden content.