manualshive.com logo in svg

GT GT8, Руководство пользователя, Страница: 22 / 34

Поделиться
Скачать
GT GT8 Скачать руководство пользователя страница 22

Page 22 

Terminal Recovery

Software Reset

Android provides a mechanism for the user to remove installed packages and data from the device. 

1. 

Select settings 

 

2. 

Select System 

 

3. 

Select Reset Options

 

 

 

 

 

 

4. 

Select ‘Erase all data (factory reset)’

 

 

5. 

Click ‘Erase all data’  

 

6. 

Click ‘Erase all data’ to confirm deletion

 

 

7. 

Terminal will restart after a few minutes with its 

factory settings and data erased.

Recovery Menu

The recovery menu can be accessed by pressing and holding the button marked "RECOVERY" whilst the 

terminal is powering up. When the Droid logo is displayed on the screen release the recovery button, then 

press and release (long press) the button again to display the menu. Once displayed the menu can be 

navigated by short and long presses on the recovery button.

 

Reboot system now

 

Wipe cache partition

 

Wipe data/factory reset

The recovery button is found near the bottom edge 

of the main PCB (under the bottom rear cover) 

circled right. 

Содержание GT8



































Отзывы:

Нет отзывов