GST GST-MNA2C, Инструкция по установке и эксплуатации

Страница: 20 / 30

GST-MNA2C/GST-MNA2F Network Annunciator
Installation and Operation Manual
Page 17
Setting menu, select TCP/IP Setup as shown in the figure below Fig.5-10. On the
programming window to the right, key in IP Address, Subnet Mask and Gateway
address. Note that annunciator
’s IP address shall be in the same subnet as the
programming computer.
Fig.5-10
Clicking Computer in Fig.5-9 pops up the screen as shown in Fig.5-11. At this time, the
configurations and definitions can be downloaded to the annunciator from GstNDef
Defining Tool.
Fig.5-11
5.3 User Setup
Clicking button enters User Setup menu by inputting user password. Messages
about soft keyboard, display, PAS, clock, printer, day/night mode, language, project
name, and so can be set in this screen. Refer to the figure below Fig.5-12.