GST GST-MNA2C, Инструкция по установке и эксплуатации

Страница: 19 / 30

GST-MNA2C/GST-MNA2F Network Annunciator
Installation and Operation Manual
Page 16
Fig.5-8
5.2 Programming the annunciator Through GstNDef Defining Tool
Configurations and definitions can be downloaded to the annunciator through USB or
Ethernet interfaces after they are programmed by using GstNDef (version 1.0 or above)
Defining Tool.
5.2.1 Download thru USB interface
After programming the annunciator using GstNDef Defining Tool, save the configuration
and definition to a USB stick, and then insert the USB stick into the USB port on the
SD-400 LCD Drive Board of the annunciator.
Fig.5-9
Clicking Maintain Database in Advanced Setting menu enters the screen as shown in
Fig.5-9. After clicking the USB, the annunciator can automatically update according to
data from U-disk.
5.2.2 Download thru Ethernet interface
After programming the annunciator using GstNDef Defining Tool, connect Ethernet port
of the programming computer to the Ethernet interface on annunciator
’s SD-400 LCD
Driver Board through a switch, a router or a cross-over Ethernet cable. In Advanced