GST GST-MNA2C, Инструкция по установке и эксплуатации

Страница: 18 / 30

GST-MNA2C/GST-MNA2F Network Annunciator
Installation and Operation Manual
Page 15
5.1.2 Advanced Setting
Clicking Advanced Setting in Panel Setup menu enters the screen for senior setting.

Network Setup: clicking Network Setup in Advanced Setting menu pops up the
screen for setting the network on the right. Users can set up based on actual
situation. Refer to the figure below Fig.5-6.
Fig.5-6
Panel No. : input the number of the annunciator here.

Delay Setting: Users can set delay based on the actual situation by clicking Delay
Setting in Advanced Setting menu as shown in Fig.5-7. Delay for Alarm Silence,
Delay for Buzzer Silence and PAS Verification Time can be set.
Fig.5-7

Update Firmware: Clicking Update Firmware in Advanced Setting menu and
entering the super password (obtained from the maintenance service supplier),
users can update firmware as shown in Fig.5-8, then insert U-Key into the LCD
drive board and click OK to update firmware.