- 19 -
PEDQ 3005/4005/5005 QMX
Adapting the output level
This setting is not essential for these cassettes.
Under this menu item, the "
control
" setting is used to set a digital carrier to the
analogue video carrier frequency of the output channel. This makes it possible
to measure the absolute output level of these cassettes with an analogue test
receiver.
Box 4
0 dB
LEVEL:
control
• Use the test receiver to measure the output level of the channel strip.
•
In the menu of the program step "
LEVEL: control
" use
to set the output
level step-by-step ("
0
" … "
–7
" dB).
Generating a QAM signal for test purposes
When set to "
random
" in the "
LEVEL:
" menu, the cassettes can also generate
a QAM signal for testing, without there having to be an input signal.
• Use
to place the cursor under "
control
" and then use
to acti-
vate the "
random
" function.
• Press the
key.
—> The "Setting the TS/ORGNET identification" – "
TS/ORGNET:
" menu is
activated.
Setting the TS/ORGNET identification
If available, the TS/ORGNET identification is taken from the supplied signal
of the corresponding channel strip. With the "
auto
" setting, the TS/ORGNET
identification in the incoming transport stream is entered and displayed. If
there is no TS/ORGNET identification in the incoming transport stream or if
the TS/ORGNET identification is to be changed, you can define it yourself
(manually) in the "
man
" setting.
We recommend to set a new TS/ORGNET
identification as normally multiple data streams will be converted to one new
data stream.
Box 4
man
TS/ORGNET:
0001,FF01
