GSS HDMU 790 C, Инструкция по сборке

Страница: 29 / 41

- 29 - HDMU 790 C
Selection ASI:
—> Returning to "Input settings" main menu (page 22).
—> If necessary set a further line.
Selection Tuner:
–> The "PID monitoring" – "
NO CA
" submenu is activated.
pid
monitoring
—> This menu is only displayed if "Tuner" is selected in the "Input set-
tings" main menu (page 22).
In this menu you can switch off the PID monitoring and call up a menu for the
settings of the CA module (dependent on the CA module).
Bx 4A
PID Check on NO CA
=>
Bx 4A
PID Check on CA-MENU
=>
—> "NO" will be hidden, only if a service is descrambled. That means,
if the CA module is working.
PID monitoring:
—> The factory default of the PID monitoring is switched on.
If particular PIDs are not descrambled the CA module is reset. Ad-
ditionally dropouts may occur if several stations are descrambled.
To prevent this the PID monitoring can be switched off.
• Use the buttons to switch "
off
" or "
on
" the PID monitoring.
• Use the button to activate the menu of the CA module.
—> Access to this menu is only possible with installed CA module and
inserted smart card.