GSS HDMU 790 C, Инструкция по сборке

Страница: 12 / 41

- 12 - HDMU 790 C
5 p
rogramming
5.1 p
repar ation
• Check the software versions of the head-end station and the module and
update them if necessary. The current software versions can be found on the
website "
www.mygss.eu ".
• Connect the test receiver to the modulator output on the module
H
or to the RF
test output on the output collector if it is already connected (page 10).
• Adjust the test receiver to the output channel / output frequency of the chan-
nel strip to be set.
• Switch on the channel strip (modulator) if necessary (page 17). For each chan-
nel strip, there is an status LED which indicates if the channel strip is switched
on.
Status LEDs
Channel strip A
Channel strip B
Channel strip C
Channel strip D
• Balance the output levels of the channel strips " A " … " D " and level them to
the output levels of the modulators of other modules used if the difference in
level is
≥ 1 dB (page 17).
—> In order to prevent interference within the head-end station and the
cable system, the output level of the cassette must be decreased by
10 dB compared to analogue cassettes at 64 QAM, and by 4 dB
compared to analogue cassettes at 256 QAM.