GSM POWER SOCKET USER MANUAL
23
Method
The
Master
user sends following SMS message in order to:
Enable timing switch on the output:
#128#1#
(18)
Successful SMS reply
Schedule control: function ON
WorkDay, StartTime-EndTime
If
the value of the “
WorkDay, StartTime, EndTi
me”
on the SMS
reply are all 0, it means the time duration has not been set. (Refer
to 3.4.2)
Then
GSM Power Socket
will keep switching on or off the output
automatically according to the schedule settings.
3.5.2 Set time period to switch on the output
Description
After successful setting of time duration to switch on the socket
output, the schedule parameter will be saved on the socket until
GSM Power Socket
is reset to factory settings.
But the “timed switch on the output” feature is applied only when
command 17 be set.
Method
The
Master
user sends following SMS message in order to:
Set time period to switch on the output:
#129#
WorkDay
#
StartTime
#
EndTime
#
(19)
WorkDay
: one digit, the values lie in
the range of “0” to “8”.
The following table contains the descriptions of each value:
Value
Corresponding day
0
Sunday
1
Monday
2
Tuesday
3
Wednesday
4
Thursday
