GSM POWER SOCKET USER MANUAL
17
GSM Power Socket
will reply to the user after it receives the SMS
command.
Note
The “#” symbol must not be ignored when typing an SMS
command.
No allow any space within the commands.
3.1.3 Add a master number to the socket
Description
If
GSM Power Socket
is being used for the first time, or
GSM Power
Socket
has been reset to factory settings, the Master
user’s
number must be programmed into the socket.
Method
The user must edit and send the following SMS to socket via
his/her mobile phone (the phone number will be the
Master
number) in order to:
Add a master number to the socket
: #00#
(2)
Successful SMS reply
Welcome to use
GSM Power Socket
.
Your Password is:1234..
Failed SMS reply
If a user tries to add another
Master
user again,
GSM Power
Socket
will send a notification via SMS stating “The master user
already exists.”. The Master number should be changed. (Refer
to Chapter 3.1.4)
3.1.4 Change the master number
Method
Method 1:
The
Master
user sends following SMS message in order to:
Change the master user’s number:
#14#
NewMasterNumber
(3)