GSM POWER SOCKET USER MANUAL
18
NewMasterNumber
should be the new Master user’s
mobile phone number.
Method 2:
GSM Power Socket
should be reset to factory settings to remove
old Master number before setting the new one. (Refer to Chapter
3.11)
Successful SMS reply
New master number set successfully.
Successful SMS reply will be sent to the new
Master
user. Then
the old
Master
user’s number will not be able to control
GSM
Power Socket
anymore.
3.1.5 Add a family number
Up to 4
family
users’ number can be stored on one socket.
Family
users have the authority to send SMS command to switch on or
cut off the
GSM Power Socket
output. The
family
users should remember
and safeguard the socket’s SIM number.
Method
The
Master
user sends following SMS message in order to:
Add a family number:
#06#
FamilyNumber
#
(4)
Add several family numbers:
#06#
FamilyNumber1
#...#
FamilyNumber4
#
(5)
FamilyNumber
should be the
Family
user’s mobile phone
number.
Successful SMS reply
#******# Family numbers set successfully.
3.1.6
Check family user’s number
Refer to Chapter 3.10 Check status.