SGM
GB
Idea Moving Led 100
XM335-V1.1-A
12
No DMX Status
With this function, when the drive is not DMX signal, it runs automatism, close, hold and music, the default
is hold.
Pan Reverse
With this function you can reverse the Pan-movement.
Tilt Reverse
With this function you can reverse the Tilt-movement.
Fine resolution
With this function, you can fine resolution switch of pan movement or tilt movement.
Pan Degree
With this function, you can select pan degree for 630 or 540.
Feedback
With this function, you can feedback switch of pan movement or tilt movement.
Movement Speed
With this function, you can select scan mode from 1 to 4.
Mic Sensitivity
With this function, the default is 70%, you can select the desired microphone sensitivity from 0 % to 99 %.
SERVICE SETTING
Service Password
With this function, you can set the service password.
Fan Voltage
With this function, you can select fan voltage for high or low, the default is low
ATTENTION!!
The model is not recommended when ambient temperature is higher than
15 Celsius degree.
Fans Control
With this function, you can set the speed of the running fans. The selections have Auto
、
high and low.
Display Setting
Shut off time
With this function you can shut off the LCD display after 2 to 59 minutes. Turn the encoder in order to select
the desired shut off time.
Temperature C/F
With this function, Display the temperature for Celsius or Fahrenheit.
Initial effect
With this function, Display initial effect position.
Wireless DMX
From factory, this projector is prepared for wireless data transmission (W-DMX). If you wish to de-activate
W-DMX control, you can select the function “De-activate WDMX” by turning the encoder. With the function
“rest”, you can log out the projector from the wireless sender.
Reset Default
With this function, you can select restore factory set for ON or OFF, the default is OFF.
