GSM IDEA MOVING LED 100 Скачать руководство пользователя страница 17

Страница: 17 / 23

SGM

Idea Moving Led 100

XM335-V1.1-A

To start a Auto Program please proceed as follows:

Slave-Setting

Select “Function Mode” by turning the encoder.

Press the Enter button to confirm.

Select “Set to slave” by turning the encoder.

Press the Enter button to confirm.

Turn the encoder to select “Slave 1”, “Slave 2” or “Slave 3”.

Press the Enter button to confirm.

Press the Mode/Esc button in order to return to the main menu.

Automatic Program Run

Select “Function Mode” by turning the encoder.

Press the Enter button to confirm.

Select “Auto Program” by turning the encoder.

Press the Enter button to confirm.

Turn the encoder to select “Master” or “Alone”. The selection "Alone" means Stand Alone-mode and
"Master" that the device is defined as master.

Press the Enter button to confirm.

Press the Mode/Esc button in order to return to the main menu.

Program selection for Auto Pro Part

Select “Edit program” by turning the encoder.

Press the Enter button to confirm.

Select “Select programs” by turning the encoder.

Press the Enter button to confirm.

Turn the encoder to select “Auto Pro Part 1”, “Auto Pro Part 2” or “Auto Pro Part 3”, and thus select which
Slave program is to be sent. Selection “Part 1” means, that the Slave unit runs the same program as the
master units.

Press the Enter button to confirm.

Press the Mode/Esc button in order to return to the main menu.

Program selection for Edit Program

Select “Edit program” by turning the encoder.

Press the Enter button to confirm.

Select “Edit program” by turning the encoder.

Press the Enter button to confirm.

Turn the encoder to select the desired program. With this function you can edit specific scenes into a
specific program.

Press the Enter button to confirm.

Press the Mode/Esc button in order to return to the main menu.

Automatic Scene Recording

Select “Edit program” by turning the encoder.

Press the Enter button to confirm.

Select “Edit scenes” by turning the encoder.

Turn the encoder to select the desired scene numbers. You can program a maximum number of 250 •

Turn the encoder to select the desired scene numbers. You can program a maximum number of 250
scenes.

Press the Enter button to confirm.

Press the Mode/Esc button in order to return to the main menu.

Содержание IDEA MOVING LED 100
























Результаты поиска

Содержание IDEA MOVING LED 100

Отзывы:

Похожие инструкции для IDEA MOVING LED 100

Бренды по названию

Популярные бренды

GSM IDEA MOVING LED 100, Руководство пользователя

Результаты поиска

Содержание IDEA MOVING LED 100

Отзывы:

Похожие инструкции для IDEA MOVING LED 100

Бренды по названию

Популярные бренды