SGM
GB
Idea Moving Led 100
XM335-V1.1-A
18
CLEANING AND MAINTENANCE
The following points have to be considered during the inspection:
1.
All screws for installing the devices or parts of the device have to be tightly connected and must not be
corroded.
2.
There must not be any deformations on the housing, color lenses, fixations and installation spots (ceiling,
suspension, trussing).
3.
Mechanically moved parts must not show any traces of wearing and must not rotate with unbalances.
4.
The electric power supply cables must not show any damage, material fatigue or sediments.
Further instructions depending on the installation spot and usage have to be adhered by a skilled installer
and any safety problems have to be removed.
CAUTION
Disconnect from mains before starting maintenance operation.
In order to make the lights in good condition and extend the life time, we suggest a regular cleaning to the
lights.
1.
Clean the inside and outside lens each week to avoid the weakneness of the lights due to accumulation
of dust.
2.
Clean the fan each week.
3.
A detailed electric check by approved electrical engineer each three month, make sure that the circuit
contacts are in good condition, prevent the poor contact of circuit from overheating.
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never use alcohol or
solvents.
There are no serviceable parts inside the device except for the lamp. Please refer to the instructions under
“Installation instructions”.
Should you need any spare parts, please order genuine parts from your local dealer.
TECHNICAL SPECIFICATIONS
Power supply:
100V~240V,50Hz/60Hz
Power consumption: max. 230W
Packing dimensions:
35x29.5x43cm
Net weight:
7.6KGS
Gross weight:
10KGS
Remark:
errors and omissions for every information given in this manual excepted. All information is
subject to change without prior notice.
