7
9
Electrlcal connection
This appliance must be
installed by a qualified person.
Before connecting the appliance, make sure that
the supply voltage marked on the rating plate
corresponds with your mains supply voltage.
WARNING: THIS APPLIANCE MUST BE
EARTHED.
Connecting the mains supply cable
•
The mains terminal block is located on the
underside of the hob and the terminals are
accessible by removing the terminal block
cover by removing the cover screw.
•
The cable connections must be in accordance
with the diagram located on the bottom of the
hob.
L
220-240V a.c. 50Hz
Troubleshooting Guide
Problems
Possible Cause and
solve
The hotplates
are not
functioning or
will not switch
on.
Check that the mains
electrical supply to the
appliance is correct
and working. Check the
mains fuse.
A humming
sound is heard
when a hotplate
is selected.
This is normal; the
sound will disappear
when the hotplate heats
up
The hotplates
have become
discoloured
This maybe caused
by burnt on remnants
of food. This will not
affect the working of the
appliance. However you
should make sure that
the cleaning instructions
are being followed
regularly.
Only two of the
hotplates on
my cooktop are
working
You should recheck
that the terminal screws
are all fully tightened
between the links.
IMPORTANT: If your appliance appears not
to be operating correctly, then you should
disconnect it from your mains supply and
then contact the Service Department .
DO NOT ATTEMPT TO REPAIR THE
APPLIANCE BY YOURSELF.
Hard Wired Appliances :
When making the mains supply conductor
connections to the terminal block within the
terminal box , please ensure that minimum
clearances are being maintained between
individual conductors and conductors/connectors
to the adjacent metal surfaces of the terminal box
itself , where possible add heat shrink sleeves to
any bare conductor end/connectors prior to
securing.
