8
PNEG-902
Multi - Module Dryer Stacking
3. Module Preparation and Installation
Module Preparation
• Identify all parts shipped in crates or in the back of the dryer.
• Group parts for each of the assemblies together to have them at hand as needed.
• Attach the rear ladders and safety cages to the rear of all modules if not already installed
of this manual.)
• Attach the front safety cages to the front ladder of all modules (
of this manual.)
See PNEG-1273 for reference.
• Raise the top auger to its installed position.
• Install the wet bin side panels and attach them to the top auger housing.
• Install the pulleys, belts and guards to the top auger and/or to the bottom auger.
• Install the fill hopper.
See PNEG-349 for reference.
• Assemble the service platform onto the top module and/or the middle module.
• Attach all of the stiffener supports to each module.
• Double check to see if all parts are installed as needed.
This product may have sharp edges! To avoid injury, handle sharp edges with
caution and use proper protective clothing and equipment at all times.
Содержание PNEG-902
Страница 2: ...2 PNEG 902 Multi Module Dryer Stacking...
